For this week's WIP Wednesday hobby stream, I start off with a review of the Dr. Tabletop Drop Top, which was created as part of a kickstarter to convert citadel paint pots into dropper bottles. As a long-time proponent of transferring my citadel paint to dropper bottles, I was interested to see how these new Drop Tops would measure up to the old standard of just transferring paint, both in terms of ease of use and cost.
Once I get through messing around with that on the video, I get to more sculpting on my #DominaNid3 Tyranid Dominatrix project, doing some more work on one of its arms.
Next up on was tackling the creature's head. This Tyrannofex is going to be carting around some huge armour plates on its forearms to protect from incoming fire. One of the most important things it is protecting is its targeting array, which I wanted to make look like the organic, Tyranid equivalent of a satellite dish. The head is heavily armoured, but when those armour plates "bloom" open, they reveal all manner of eyes, scent pits, and even hyper sensitive brain matter.
Basically, a horror show of senses meant to detect any and all targets, across a number of wavelengths and spectra.
And I did it all in one go! And you can watch the results below:
I've got another video of me working on Project Gunbeast for you (two in one week! Must be on vacation!), still working on the creature's biocannons. This time I'm adding the armour plates to the top, largest cannon, and I try to sculpt them all in one go.
Once again, this creature is meant to represent a Tyrannofex, borrowing heavily from my own Tyranid Exocrine and Dactylis designs.
Here's some progress on a Tyranid project I've been working on in the background. Years ago I found a KILLER deal on two Tyrannofexes on eBay. It was cheap enough to seem too good to be true, and when they arrived, it turned out it WAS too good to be true.
Alas. Chinacast.
I was so frustrated at how I'd been duped that I burried the models in the bottom of my Tyranid bin and forgot about them.
Until this year, when I stumbled across them, and resolved to get my revenge on the chinacaster by turning one of them into a badass Tyranid gunbeast. I'm referring to this as Project Gunbeast. On paper, this bad boy is going to rep a Tyrannofex, but you'll find that my design borrows heavily from my previous Tyranid Exocrine and Dactylis designs--particularly the idea of it being a mobile Tyranid gun emplacement that carries its own fortifications around with it!
Anyway, in this livestream I do some detailing on the Gunbeast's back-mounted biocannons.
I've done a number of sculpting tutorial videos over on YouTube, but if you're just getting started with greenstuff, and you have only 3 minutes to spare, here are my quick tips that you need to know. Once you've got these down, I very much encourage you to check out my other video tutorials on YouTube.
Also! If you're already familiar with my tutorials, and you have a suggestion for other videos I could produce, let me know in the comments below what I can help you sculpt.
I've been dragging my heels on this one for more than a little while, but I'm happy to announce that my next full-length How to Sculpt video is live on my YouTube Channel!
This one focuses on sculpting organic armour, of the type most commonly seen on Tyranids. However, in this video I also detail how the process for sculpting Dark Eldar armour plates is essentially the same. I also do the whole sculpt big, then sculpt small approach in this one.
I hope you find it useful!
And if you've not been over to my YouTube channel yet, please head on over and subscribe as I'll be releasing a couple more videos soon, and subscribing on YouTube is the best way to get notified about them as soon as they drop.
Got a BRAND NEW How to Sculpt video coming at you, this one focusing on getting started with armatures.
It's also the first wholy new video I've shot in nearly 4 years! I got a bit disheartened with how much work goes into these things, and how little folks seemed to care about them.
But I've been getting a steady stream of subscribers to my YouTube Channel of late, and that, combined with a swift kick in the ass from my brother Hydra, inspired me to get this video shot, edited, and uploaded inside of 24 hours! No dragging my feet on synching audio and editing down. Just a one-shot, direct to digital product.
So it's a little rough around the edges in places, but I hope you like it and find it helpful!
Note: I'm also posting this from my phone, so I'm sorry if it Le Bust.
Sculpting stitches using greenstuff / epoxy putty is a process that looks like it should be fiddly and complex, but is surprisingly easy to pull off when you have the right instruction. It's for this reason that I'm so excited to share today's video with all of you today. This is easily one of my favourite things to sculpt :D
So, just like how I did with the spinal columns video, I will start by showing you the process in large scale using plasticine (ew), and then move on to show it in small scale in actual greenstuff mixed with apoxie putty.
The immediate application for this technique is for sculpting flesh that has been hurriedly stitched back together on something like a pit slave or a haemonculus flesh construct. However, if you hold back on all the puckering and stretching of the flesh around the stitches, and leave it more smooth, you can easily use this technique for creating roughly stitched leather for things like Ogre Kingdoms, Oruks, and Skaven. Heck, I'm sure that a chaos general could even apply this tutorial with great effect :)
I didn't mention it in the video, as it can be obnoxious, but please click the link to the video on YouTube and like, comment, and share the video from there to get a few more eyeballs on it. I spend a lot of time and effort making these videos for free, so I'd love it if you could help me get them to the widest possible audience!
If you've got any suggestions for videos you'd like to see, please leave them in the comments below. Our next video will be about sculpting organic armour plates for Tyranids and Dark Eldar, and after that I'm wide open for suggestions :)
Well, it's been a while, but—inspired by the warm and fuzzy comments on YouTube—I climbed back on the hobby tutorial horse. I present to you How To Sculpt Miniatures Episode 4: How to Sculpt Spinal Columns!
If you've got a long memory, you may recall that this is our second run at a spinal columns video. However, I assure that this video is far more...um...professional...than that video, and far less German :P
This should be useful for any flesh crafting Haemonculi out there, any Hive Tyrants, particularly those looking to craft some massive Tyranid terrain, or maybe even plaguelords or other chaos generals looking to make some fleshy, daemon constructs.
I hope you enjoy it. It is a good deal more in depth than previous videos as it focuses on one topic, and my future videos will be in this style.
If you've got any suggestions for videos you'd like to see, please leave them in the comments below. Our next video will be about sculpting stitches and sutures, and I've got one more slightly Niddier one in the can, but after that we're wide open for suggestions :)
For the third How To Sculpt Miniatures video, we're going to be combining what we covered in videos 1 and 2 by applying different tools to putty to see the effects they create.
Once again, these first three videos will rehash the information I shared in my original How to Sculpt Miniatures posts, which is best geared at sculpting beginners. However, even experts may discover some helpful tips :)
With this one posted, we've finished covering the first three articles, so next time I'll be sharing a re-do of the shakey-cam How To Sculpt Spinal Columns video I did back in the day.
As always, please let me know in the comments below if you have ideas for things you would like to learn to sculpt in a video.
Next up in my series of How To Sculpt Miniatures videos: how to use epoxy putty!
These first three videos will rehash the information I shared in my original How to Sculpt Miniatures posts, which is best geared at sculpting beginners. However, even experts may discover some helpful tips :)
Once we've got the first three videos taken care of, we'll move into new territory, like sculpting armour plates, stitches and sutures, and spinal columns. I've also been rolling around the idea of doing a tutorial on sculpting nurgle-y things like worms, pustules, gross drippy stuff, and third eyes. Anyone interested in that sort of thing?
As always, please let me know in the comments below if you have ideas for things you would like to learn to sculpt in a video.
I've been working on this, on and off, for a looong while now, but I'm happy to finally announce the launch of How to Sculpt Miniatures video tutorials!
HURRAH!
This here is the introduction video, and there's a link at the end to the first episode, all about Tools! The next episode will be up in two weeks.
I hope you enjoy them, and please let me know what you think! Also, I'm eager to hear what people want to learn How To Sculpt.
Also, if you could please share these videos, I'd greatly appreciate it :)
When posting photos on them online, someone requested I do a tutorial on
how to sculpt hoods, so here it is: my long-delayed return to my How to Sculpt Miniatures series!
So remember these guys? They're my Genestealer Cult Enforcer squad, which is a fancy, made-up name for a bunch of hooded, shotgun-totting Neophyte who are meant to escort my cult's higher-ups into battle.
To make them stand out and seem covert and insidious, I wanted to give them hoods to match the hood I will eventually put on my Primus, based on this guy:
So, without further ado, I'll get into the materials, tools, and process you need to follow for sculpting your own hoods!
This How to Sculpt Miniatures series is my attempt to demystify the idea of sculpting your own miniatures. It seems that more and more people are taking cracks at it these days as the means of production are getting so very cheap and third-party casting companies are growing like mushrooms. Still, no matter how many head-swap bits are retailed, there is going to come a time when you have an awesome idea for a miniature, and there might not be a compatible, ready-made bit. You're going to have to make it yourself, and it is my belief that the only thing standing in your way is a few helpful tips.
Greetings Epoxy Crafters!
I was trying to decide whether to write this article or not to write this article. I figured that if anyone was interested in procuring the tools/materials I highlighted, they would probably just look them up on the Internet, but, in case you're lazy or you're looking for some direction, I'll go over where I found the tools and materials I recommend.
This How to Sculpt Miniatures series is my attempt to demystify the idea of sculpting your own miniatures. It seems that more and more people are taking cracks at it these days as the means of production are getting so very cheap and third-party casting companies are growing like mushrooms. Still, no matter how many head-swap bits are retailed, there is going to come a time when you have an awesome idea for a miniature, and there might not be a compatible, ready-made bit. You're going to have to make it yourself, and it is my belief that the only thing standing in your way is a few helpful tips.
UPDATE: I updated this article on Wednesday May 9 to add in a fourth Caveat. It was the type of thing that seemed obvious, so I left it out, but I have since realized that it is pretty important if you've never sculpted before or are just starting. Be sure to check it out below!
The following is best viewed as a continuation of How to Sculpt Miniatures 2 as I wasn't exactly sure where you break that article. Now that I've gone over the putties I use and have talked a bit about how to get a bit more out of them, I'll be getting into the nitty gritty of how parts 1 (tools) and 2 (putties) come together.
This How to Sculpt Miniatures series is my attempt to demystify the idea of sculpting your own miniatures. It seems that more and more people are taking cracks at it these days as the means of production are getting so very cheap and third-party casting companies are growing like mushrooms. Still, no matter how many head-swap bits are retailed, there is going to come a time when you have an awesome idea for a miniature, and there might not be a compatible, ready-made bit. You're going to have to make it yourself, and it is my belief that the only thing standing in your way is a few helpful tips.
Like I mentioned in my previous article on tools: I don't consider myself a trained professional, just an experienced amateur. Thus, I'm going to be talking about the putties I use, but, unfortunately, I won't be able to tell you anything about super sculpey or milliput, procreate or brown stuff. But that's alright because it's my goal to convince you that all you really need for 98% of your sculpting projects are two reasonably cheap, readily available putties. This article will be a general overview with a few tips about how to have more control over your putty, but it got a little long, so I will be saving hands-on techniques for my next installment. Still, I hope you find this one helpful in getting you better acquainted with sculpting mediums.
UPDATE: I've just polished off the video versions of these tutorials, and you'll find the second video, all about putty, below. The video is best consumed as an illustration to this article, so I'd still recommend reviewing both. ENJOY!
